Solar Powered Remote Video Surveillance 2

Solar Powered Remote Video Surveillance 2

Example solution to monitor remote sites such as construction sites, utility installations or other areas where no power exists (and outside range of power-over-ethernet use). Sample system includes all the components: Solar PV system (solar modules, battery bank, charge controllers, dc-dc converters, dc-ac inverters, LVD's, etc.), outdoor rugged network PTZ camera, wireless long range point-to-point radio for video data backhaul & remote monitoring/ viewing/ control software.

Solution may be customized for different cameras, different loads, different ranges (up to several miles even > 50 miles), portability, different wireless technologies, e.g., Cellular, Satellite, LTE, Point-to-Multipoint, Mesh networks etc. View more on solarlong-distance linksbattery backup4G LTEwireless video or simply contact us to begin your customized design.

    • Related Articles

    • Solar Powered Remote Video Surveillance 1

      Describes a means of powering your remote video monitoring equipment and wireless backhaul via solar. Solution may be customized for different cameras, different loads, different ranges (up to several miles even > 50 miles), portability, different ...
    • What is peak sun hours (PSH) when referring to solar?

      A PSH is that time of the day when the intensity of the solar radiation reaches 1kW/m2 over a period of 1 hour. It is an ideal measure which would require the angle of inclination of the panel to the sun to be perpendicular and that the panels have ...
    • Low Voltage Disconnect (LVD) Operations

      Low voltage disconnects (LVDs) are a type of voltage disconnect device that are designed to protect batteries from damage due to excessive discharge and sensitive system loads from low battery voltage. Typically, discharging batteries beyond a ...
    • More about Power Distribution Units

      For a typical domestic electrical consumer with more than one device powered from a standard electrical outlet a normal power strip is usually enough to meet their demands. Power strips can be said to be the most basic form of a PDU. They are ...
    • Pole Mount Small Cell Installation with Backup UPS

      Pole mount small cell installation with 48VDC, 200Ah, 600W backup battery system powered by a 120VAC streetlight power tap with 7pin control passthrough to allow for luminaire dimming. Enables uninterrupted powering of the PtP backhaul link, access ...