Remote Mobile Communication Solution #2

Remote Mobile Communication Solution #2

A generic example of a communication trailer for example for emergency management. Shown here with the aggregation of 5 cellular 4G Cellular & 5G NR RF data modems for increased performance and redundancy. Design includes:

Isolation of 4G Cellular & 5G NR RF paths with cross-band coupler/ diplexer for independent boosting (and to prevent filtering out of higher frequency Wimax band by 4G cellular bi-directional amplifiers). Splitting 2.4GHz WiFi RF path into two channels one goes to outdoor MIMO antennas and other go-to indoor antennas.

The illustration shown is for vehicle use but easily adapted to the building, remote sites, etc. Contact us for the entire solution and for your custom design based on specific constraints and target specifications.

Find more information on antenna options and band information (4G LTE bands and 5G NR bands.)

    • Related Articles

    • Remote Mobile Communication Solution #1

      A generic example of a communication trailer for example for emergency management. Shown here with the option to extend wireless Internet coverage for 2 miles using a portable Point-to-Point Microwave data link. Contact us for the entire solution and ...

    • Remote Mobile Communication Solution #3

      A generic example of a communication trailer for example for a mobile office. Shown here with cellular to PSTN phone/ fax system (fixed wireless terminal) and Cellular 3G/4G/5G router. Uses 2 WAN's for data to provide seamless failover in the event ...

    • Mobile Office Communication with MultiWAN Router

      Combined is this drawing are several 4G/5G NR data cards, WiFi & Satellite. This allows link-aggregation/ load-balancing to improve the connection speed/latency and failover for redundancy/nationwide coverage. See more about multi-wan routers. Learn ...

    • RV/ Camper Cellular Amplifier & 3G/ 4G Router

      In this generic example, an external antenna (mounted on the RV) picks up the existing cell phone signal and sends it to the amplifier. Directly attached to a WWAN Router is a 4G data modem. The signal from the antenna passes through a dual-band ...

    • Vehicle Direct Connect Dual-Band Amplifier

      Directly attached to a WWAN Router is a 4G data modem, 800/1900MHz in this generic illustration. The signal from the antenna passes through a dual-band amplifier before getting to the router. From the 4G LTE or 5G NR router anywhere in the vehicle, ...