Mitsubishi Electric PAC-USCMS-MN-1 Maintenance Tool Replaces the CMS-MNG-E
The CMS-MNG-E Maintenance Tool converter is used to aid technicians in maintenance tasks by monitoring and controlling various CITYMULTI system operational functions, status and settings.
It displays the status of and allows control of all outdoor unit, BC Controller, and indoor unit LEVs. Other parameters it displays include: malfunction logs for connected system components, temperature readings detected by thermistors, system pressures detected by pressure sensors.
The M-NET Maintenance Tool Software must be installed on a PC that meets the system requirements for the CMS-MNG-E converter to monitor a system.
Mitsubishi Electric PAC-USCMS-MN-1 Maintenance Tool is the replacement for the CMS-MNG-E. It collects full diagnostic information for later viewing and for full system control during troubleshooting. The tool includes an SD card for data storage and an M-NET transmission line.
It works with City Multi, S-Series and M-Series multi-zone (branch box type) units.
A cable set, M21EC0397(which is aquired separately) is also needed to work with the tool. The software for the MN Converter is available on Mitsubishi’s linkdrive.
See more on Mitsubishi Electric PAC-USCMS-MN-1 Maintenance Tool in the article here.
Related Articles
Mitsubishi Electric PAC-USCMS-MN-1 Maintenance Tool
Mitsubishi Electric PAC-USCMS-MN-1 MN converter collects full diagnostic information for later viewing and for full system control during troubleshooting. It includes an SD card for data storage and an M-NET transmission line. This tool works with ...Mitsubishi Electric PAC-IT51AD-E Vs PAC-IT52AD-E IT Signal Adapter
Mitsubishi Electric PAC-IT51AD-E and PAC-IT52AD-E are terminal signal adapters for MHK1 thermostat interface. PAC-IT51AD-E allows CITY MULTI units with CN100 and CN51 terminals to supplement CN105 connection for use with the MHK1 thermostat. ...Mitsubishi Electric’s M-Net Adaptors
M-NET Adaptors installed in M series indoor units and P series outdoor units allow for M-NET control of heat pump and air conditioning systems. The choice of gateway adapters such as LMAP04 for LONWORKS or BAC-HD150 for BACnet allows M-NET network to ...Mitsubishi Electric Trane PAC-US445CN-1 Thermostat Adapter
Mitsubishi Electric introduced the PAC-US445CN-1 Thermostat Adapter which, like the preceding PAC-US444CN-1, allows a field-supplied 24V thermostat to control Mitsubishi mini-split indoor units through the CN105 connector and CNH02 connector for ...Mitsubishi Electric PAC-USSEN001-FM-1 Vs PAC-USSEN002-FM-1 Flush Mount Remote Temperature Sensor
Mitsubishi Electic Trane offers an array of both wired and wireless sensors. PAC-USSEN001-FM-1 and PAC-USSEN002-FM-1 are flush-mounted temperature sensors that allow remote sensing for up to 100 feet away from the indoor unit. They use 22/2 AWG UL ...