Can Mitsubishi Electric MCCH1 Replace MRCH1 Thermostat?
Will the Mitsubishi MCCH1 Redlink Controller directly replace an MRCH1 control without any additional hardware? I have 4 zone MRCH1 thermostats that I need to replace.
MRCH2 Does Not Work After Introducing PAC-USWHS002-WF-2 WiFi Interface
I just installed my Mitsubishi wireless interface PAC-USWHS002-WF-2. I am currently connected to the app. I plugged the MIFH2 into the PAC-USWHS002-WF-2 wireless interface. The green light is flashing on the MIFH2, but the MRCH2 thermostat only says "wait"
Mitsubishi Electric MIFH1 Receiver Replacement
I have seen that the Mitsubishi MIFH1 receiver has been replaced by the MHK2. If that is the case, can I get only the MIFH2 to replace it so that it can work with my MRCH1?
Mitsubishi Electric MHK2 Thermostat Stuck on WAIT
My MHK2 thermostat is stuck on wait and after I performed everything to reset it numerous times, nothing happened. What can I do?
Using MHK2 Thermostat and PAC-USWHS002-WF-2 Kumo Cloud Adapter Simultaneously
I have a MSZ-GL12NA indoor unit with the Mitsubishi Electric MHK2 Wireless Remote Control kit installed. I want to add Wi-Fi control through the Kumo cloud app but also keep the wireless wall thermostat. Can this be done? If so, what part do I need to
Mitsubishi Electric MRCH1 Thermostat Replacement
I have Mitsubishi PEAD-A24AA4 indoor unit, PUZ-A24NHA4 outdoor unit and MIFH1 receiver. What thermostat and other equipment do I need to buy to make the system work with my receiver?
PAC-USWHS002-WF-2 Compatibility
I have a MFZ-KJ18NA indoor unit with the MHK2 wireless thermostat kit. I would like to use a PAC-USWHS002-WF-2 Wi-Fi kit but would like to get clarification on this note in the compatibility document, "Due to the power requirements of the Wireless Interface
Remote App-Based Control for Mitsubishi Electric MSZ-GL12NA-U1
I want to upgrade my current Mitsubishi Electric MHK1 with an app-based remote control. Is there any option that is compatible with my MSZ-GL12NA-U1 indoor unit? Also, can the available option work with MHK1 thermostat?
Controlling one Indoor Unit using MHK2 and PAC-USWHS002-WF-2
I have 3 zones so I would need to install one of these PAC-USWHS002-WF-2 (https://shop.rfwel.com/mitsubishi-electric-pac-uswhs002-wf-2-wireless-wi-fi-interface-control-2/) per zone, is that right? Also will using this affect my control using MRCH2?
Mitsubishi Electric Third Party Thermostat Adapter
I have an MSZ-GS30NA air handler and looking for a compatible Wi-Fi interface. In the diagram on the listing here (https://shop.rfwel.com/mitsubishi-electric-pac-uswhs002-wf-2-wireless-wi-fi-interface-control-2/), I see the MIFH2 component. Is that a
Mitsubishi Electric MRCH1 Thermostat Replacement
Hello all! I have a Mitsubishi Electric MRCH1 that is now obsolete. Can you tell me if the Mitsubishi MRCH2 is a direct replacement for this thermostat or I need to get the entire MHK2?
Mitsubishi Electric MHK2 Set Point Scheduling
Hi all! I’m looking for a thermostat control for Mitsubishi mini split. I don’t like the supplied remote control. I’m hoping if I change to a thermostat, the mini split will not have to run continuously but will be triggered by the set points for either
Honeywell C7189R2002-2 Integration with Kumo Cloud Control and MHK2
We are having our new Mitsubishi PUZ/PVA heatpump system installed that has the MHK2 thermostat and the Kumo Cloud unit as well. Wondering if/how I can add additional sensors to the system. Can the Honeywell C7189R2002-2, https://shop.rfwel.com/honeywell-indoor-wireless-air-sensor-2-pack/
Mitsubishi Wireless Interface 2 (PAC-USWHS002-WF-2) Wi-Fi Communication Issue
Hi all, my Mitsubishi Kumo Cloud Interface does not communicate with the Wi-Fi router. I have tried out troubleshooting including installing a new router but I still get the error message that Kumo Cloud does not connect to the router. Can any specialists
How to recover Mitsubishi Electric MHK2 Wireless Thermostat Kit PIN
I have a Mitsubishi Electric Kumo Cloud MHK2 Thermostat Kit (https://shop.rfwel.com/mitsubishi-kumo-touch-mhk2-redlink-wireless-thermostat-receiver-kit/). However, my MRCH2 Remote Controller is locked and I am unable to access it. I forgot the pin. How
Retrofitting PAC-USWHS002-WF-2 into existing MHK1 system
Hi. This is a great forum as you guys here are way more familiar with Mitsubishi VRF controls than any of my HVAC contractors! We have 9 zones of Mitsubishi City Multi S-Series units equipped with the MHK1 thermostats and MIFH1 receivers. These are pretty